Deal of the days

XTX50 DST Nitrox

€509.15 Save 15%
€599.00
Tax included

Apeks Nitrox regulators are suitable for use with up to 100% O2 and are colour-coded for easy identification.

The regulators have been specially cleaned and assembled in our purpose built class 'J' (10,000)

Clean Room using oxygen safe components and lubricants and are available in yoke ('A') clamp or DIN fitting.

The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price.

This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimalhose routing

while eliminating sharp bends in the hose

Tipo Attacco
Quantity
Out-of-Stock

 

Politiche per le spedizioni (modificale con il Modulo rassicurazioni cliente)

 

Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)

Nitrox equipment will be supplied in Europe in accordance with the EN 144-3 and the EN13949 which states that

equipment sold in CEE (European Community) countries over 21% and up to 100% will be manufactured with the special M26 fitting.

Four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose.

Features an innovative Diver Changeable Exhaust system (DCE).

This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee.

This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography)

and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees.

Optional 5th port is available for sidemount or twin cylinder set ups.

Can be converted from a right-handed hose configuration to a left-handed one.

The process of changing the regulator to a left-handed configuration is both quick and simple.

However this procedure must ONLY be performed by an APEKS Authorised Service Technician.

Available in yoke or DIN configuration.

Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.

Suitable for coldwater use (below 10 C / 50 F).

Compatible with EAN40 out of the box.

First Stage:

Uses the DST first stage

Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas

in the hose to increase at a rate faster than ambient. This results in superior performance at depth.

2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing

An environmental dry system keeps water out of the main spring chamber thus preventing ice

buildup and keeping silt and contamination out.

Second Stage

Pneumatically-balanced second stage results in smooth, easy breathing.

The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used -

press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc,

then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.

The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use.

The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.

Easy-to-grip opening effort control knob keeps the diver in control.

The second stage is manufactured with active protection against infection as all molded parts are produced

with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and

is also very effective against viruses, mould, yeast and algae.

A silicone exhaust valve improves the breathing performance of the regulator.

The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.

A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion

while drawing in the warmth of the ambient water.

RG115113

Data sheet

II Stadio
Nitrox
I Stadio
Nitrox
New product

Reviews

Write your review

XTX50 DST Nitrox

Apeks Nitrox regulators are suitable for use with up to 100% O2 and are colour-coded for easy identification.

The regulators have been specially cleaned and assembled in our purpose built class 'J' (10,000)

Clean Room using oxygen safe components and lubricants and are available in yoke ('A') clamp or DIN fitting.

The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price.

This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimalhose routing

while eliminating sharp bends in the hose

Write your review

16 other products in the same category: